Solutions by industry

Cleanroom humidity control for pharmaceuticals, electronics and medical devices

A cleanroom needs more than filtration and pressure control: temperature and humidity must also stay within product limits. Ordinary air conditioning only brings humidity down to about 50–60 %RH, so zones that need low, year-round stable humidity require desiccant rotor dehumidifiers.

What moisture causes

  • Materials and tablets absorb moisture, cake and lose shelf life
  • Electronic parts absorb moisture and fail at soldering; too dry and static builds up
  • Humidity out of limits during GMP or customer-standard cleanroom validation
  • Condensation on ceilings and ducts in humid spells

Conditions to hold

Depends on the product: most pharma and electronics cleanrooms hold 30–55 %RH; special zones need down to 20 °C / 20 %RH (dew point −3.2 °C). ENCO engineers calculate the moisture load for each room.

Reference values. ENCO engineers calculate to the requirements and actual moisture load of each site.

ENCO's solution

  • Initial discussion, survey and moisture-load calculation per room: people, materials, fresh air, airtightness
  • DryMax DMTH units handle both temperature and humidity, connected to the cleanroom AHU
  • DryMax rotor dehumidifiers treat fresh air before the AHU, cutting the cooling load
  • Temperature and humidity loggers for validation records

Typical equipment

ENCO projects

FAQ

What humidity does a cleanroom need?

It depends on the industry and product. Most pharma and electronics cleanrooms hold 30–55 %RH; special zones need lower, down to 20 %RH at 20 °C. The exact figure comes from the product file and the standard the plant follows.

Can cleanroom air conditioning remove moisture on its own?

Partly: the cooling coil condenses water vapour, usually bringing humidity to about 50–60 %RH. Going lower and holding it steady all year needs a desiccant rotor dehumidifier.

What part of a cleanroom project does ENCO handle?

ENCO handles the humidity and temperature control: moisture-load calculation, choosing the solution, supplying, installing and servicing DryMax dehumidifiers, working alongside the project's cleanroom and HVAC contractors.

Ask ENCO engineers to design a solution for your site

Send the room size, target humidity and the goods stored; ENCO surveys and proposes a solution free of charge.

HARISONDryMaxIKENOAikyoEdisonClimaTech