
86,000 m³/h dehumidification for an oil & gas structure blasting & paint hall
Humid sea air makes blasted steel rust again and paint fail to bond, forcing rework. The structures stand tens of metres tall, so the whole hall must stay dry, not just a small zone.
View project
Dehumidifying blasting and painting enclosures for offshore wind substations (Baltica project)
The multi-storey substation modules are wrapped in tents for blasting and painting right on the yard. Humid sea air makes steel flash-rust after blasting and weakens paint adhesion unless the space is kept dry day and night.
View project
DryMax units for Shindong, including a 36,000 m³/h unit
A large multi-section unit that had to be fully assembled and tested at the factory before the long haul to Hai Phong.
View project
AHU built at the DryMax factory, exported to Singapore
Sea-freight equipment must be finished, tested and crated at the factory, because repairs are hard once it arrives.
View project
CDP-5000 anti-condensation units for Hai Dang seafood processing plant
Seafood processing rooms are cold and humid, so ceilings and pipes sweat; water dripping onto the line threatens food safety.
View project
DRYMAX system for An Khe sugar mill
Finished sugar absorbs moisture and cakes if the air supplied to the dryer is damp; the units sit right inside the production area.
View project
Rattan and bamboo product drying room with HARISON-DR dehumidifiers
Rattan and bamboo products must be dried consistently to keep their quality. Rainy, humid weather left the business unable to plan production.
View project
Air-dried persimmon drying rooms for Lang Farm, Da Lat
Air-dried persimmons must dry slowly and evenly over many days. Da Lat is humid and misty, so natural drying easily leads to mould, weeping and colour loss, and output depends on the weather.
View project
DryMax He-Dryer for chilli, lychee, leaves and herbal powder
High-temperature drying darkens produce and destroys aroma and active ingredients; sun drying depends on the weather and risks contamination.
View project
Timber stores and conditioning rooms for furniture factories
Kiln-dried timber picks up moisture again in storage during the rainy season: warping, cracked joints, surface mould and cloudy or blistered finishes.
View project
Natural-wood drying room and store for CBS, Dak Lak
Natural wood is very wet and large piles go mouldy in the middle; export products need low, even moisture content so they do not mould in containers.
View project
DRYMAX 200 kg/h heat-pump drying system for agricultural produce
Premium produce needs a multi-stage drying process to keep its quality. The company also needed a system that qualified for the State programme supporting technology investment.
View project
33,000 m³/h dehumidification system for a painting and sandblasting booth
Northern Vietnam's damp spring season causes condensation on metal surfaces, affecting coating quality.
View project
DRYMAX dehumidifier for outdoor air treatment
Hot, humid fresh air supplied directly increases the moisture load and causes condensation inside the plant.
View project
Dehumidification for aircraft engine storage, RH < 45 %
High humidity corrodes metal parts and electronic components of engines during storage.
View project
Humidity control for pharmaceuticals and electronics: 20 °C / 20 %RH
Powdered medicines, effervescent tablets and moisture-sensitive components require very low, stable humidity in line with GMP.
View project
Moving a DryMax DMTH unit into the Vidipha pharmaceutical plant
Effervescent tablets are very sensitive to moisture; the plant room sits inside a working factory, so the unit had to be craned in over the roof.
View project
DryMax DMTH units for Olam plants
The units sit outdoors all year in sun and rain, yet must keep conditions inside the plant stable.
View project




